- Fault codes
- 185
- Block
- 802 #2
- Make group
- BMW · Mini · Rolls-Royce
- Source language
- English · German
Part 2 of the BMW · Mini · Rolls-Royce fault codes that start with 802: 185 codes with descriptions.
| Code | Description | German |
|---|---|---|
802E3C | Calfrest switch (calf rest) in the RR: switch hangs | Schalter Calfrest (Wadenablage) im RR: Schalter hängt |
802E3D | Calfrest map (calf rest) in the RR: limited adjustment due to lack of calibration with CRW / CRFE | Kennfeld Calfrest (Wadenablage) im RR: eingeschränkte Verstellung wegen fehlender Kalibrierung bei CRW/CRFE |
802E3E | Monitor inclination adjustment function (RSE) in the RR: mechanical blockage detected | Funktion Monitorneigungsverstellung (RSE) im RR: mechanische Blockierung erkannt |
802E3F | Picnic table adjustment function (PTV) in the RR: mechanical blockage detected | Funktion Picknicktischverstellung (PTV) im RR: mechanische Blockierung erkannt |
802E40 | Neck warmer SG driver (LIN): Undervoltage detected | Nackenwärmer-SG Fahrer (LIN): Unterspannung erkannt |
802E41 | Neck warmer SG driver (LIN): Overvoltage detected | Nackenwärmer-SG Fahrer (LIN): Überspannung erkannt |
802E42 | Neck warmer SG driver (LIN): overtemperature circuit board | Nackenwärmer-SG Fahrer (LIN): Übertemperatur Leiterplatte |
802E43 | Neck warmer SG driver (LIN): internal error (hardware or EEPROM) | Nackenwärmer-SG Fahrer (LIN): interner Fehler (Hardware oder EEPROM) |
802E44 | Neck warmer SG driver (LIN): heating defective | Nackenwärmer-SG Fahrer (LIN): Heizung defekt |
802E45 | Neck warmer SG driver (LIN): Fan defective | Nackenwärmer-SG Fahrer (LIN): Lüfter defekt |
802E46 | Neck warmer SG driver (LIN): Parameter data not plausible | Nackenwärmer-SG Fahrer (LIN): Parameterdaten nicht plausibel |
802E47 | Neck warmer control unit: Invalid signal Ti | Nackenwärmer Steuergerät: Ungültiges Signal Ti |
802E48 | Neck warmer control unit: Invalid roof position signal | Nackenwärmer Steuergerät: Ungültiges Signal Dachstellung |
802E49 | Neck warmer control unit: Invalid signal terminal | Nackenwärmer Steuergerät: Ungültiges Signal Klemme |
802E4A | Neck warmer control unit: Invalid signal parameter set | Nackenwärmer Steuergerät: Ungültiges Signal Parametersatz |
802E4B | Neck warmer control unit: Left KL30A supply missing | Nackenwärmer Steuergerät: Versorgung links KL30A fehlt |
802E4C | Neck warmer control unit: left heating interruption | Nackenwärmer Steuergerät: Heizung links Unterbrechung |
802E4D | Neck warmer control unit: left heater short circuit to minus or overload | Nackenwärmer Steuergerät: Heizung links Kurzschluß nach Minus oder Überlast |
802E4E | Neck warmer control unit: heating left short circuit to positive | Nackenwärmer Steuergerät: Heizung links Kurzschluß nach Plus |
802E4F | Neck warmer function: performance reduced due to limited availability of the on-board power supply system (fEPM) | Nackenwärmer Funktion: Leistung reduziert wegen eingeschränkter Verfügbarkeit des Energiebordnetzes (fEPM) |
802E50 | Neck warmer-SG passenger (LIN): Undervoltage detected | Nackenwärmer-SG Beifahrer (LIN): Unterspannung erkannt |
802E51 | Neck warmer SG front passenger (LIN): Overvoltage detected | Nackenwärmer-SG Beifahrer (LIN): Überspannung erkannt |
802E52 | Neck warmer SG front passenger (LIN): Overtemperature on the printed circuit board | Nackenwärmer-SG Beifahrer (LIN): Übertemperatur Leiterplatte |
802E53 | Neck warmer SG front passenger (LIN): internal error (hardware or EEPROM) | Nackenwärmer-SG Beifahrer (LIN): interner Fehler (Hardware oder EEPROM) |
802E54 | Neck warmer-SG passenger (LIN): heating defective | Nackenwärmer-SG Beifahrer (LIN): Heizung defekt |
802E55 | Neck warmer-SG passenger (LIN): Fan defective | Nackenwärmer-SG Beifahrer (LIN): Lüfter defekt |
802E56 | Neck warmer SG front passenger (LIN): Parameter data not plausible | Nackenwärmer-SG Beifahrer (LIN): Parameterdaten nicht plausibel |
802E57 | Neck warmer control unit: Right heating interruption | Nackenwärmer Steuergerät: Heizung rechts Unterbrechung |
802E58 | Neck warmer control unit: heating on the right short circuit to positive | Nackenwärmer Steuergerät: Heizung rechts Kurzschluß nach Plus |
802E59 | Neck warmer control unit: heating on the right short circuit to positive (safety relay KL30B closed) | Nackenwärmer Steuergerät: Heizung rechts Kurzschluß nach Plus (Sicherheitsrelais KL30B geschlossen) |
802E5A | Neck warmer control unit: heating on the right short circuit to positive (safety relays KL30A and KL30B closed) | Nackenwärmer Steuergerät: Heizung rechts Kurzschluß nach Plus (Sicherheitsrelais KL30A und KL30B geschlossen) |
802E5B | Neck warmer control unit: Heating driver right defective | Nackenwärmer Steuergerät: Heizung Treiber rechts Defekt |
802E5C | Neck warmer control unit: Right fan speed signal, short circuit to minus | Nackenwärmer Steuergerät: Drehzahlsignal Lüfter rechts, Kurzschluss nach Minus |
802E5D | Neck warmer control unit: Right fan speed signal, short circuit to positive or interruption or power supply to the fan is defective | Nackenwärmer Steuergerät: Drehzahlsignal Lüfter rechts, Kurzschluß nach Plus oder Unterbrechung oder Spannungsversorgung des Lüfters defekt |
802E5E | Control switch neck warmer (LIN): internal error (EEPROM) | Bedienschalter Nackenwärmer (LIN): interner Fehler (EEPROM) |
802E5F | Control switch neck warmer (LIN): button on the left hangs | Bedienschalter Nackenwärmer (LIN): Taster links hängt |
802E60 | Control switch neck warmer (LIN): button on the right hangs | Bedienschalter Nackenwärmer (LIN): Taster rechts hängt |
802E61 | Neck warmer control unit: Energy saving mode signal (Steuerung_Energiesparmodus_LIN) invalid or not received | Nackenwärmer Steuergerät: Signal Energiesparmodus (Steuerung_Energiesparmodus_LIN) ungültig oder nicht empfangen |
802E62 | Neck warmer control unit: Signal driving experience switch (Ist_Modus_Fahrdynamik_innen_LIN) invalid or not received | Nackenwärmer Steuergerät: Signal Fahrerlebnisschalter (Ist_Modus_Fahrdynamik_Innen_LIN) ungültig oder nicht empfangen |
802E63 | Neck warmer control unit: Signal relative time (Zeit_Sekunde_Zähler_Relativ_X_NWR_LIN) invalid or not received | Nackenwärmer Steuergerät: Signal Relativzeit (Zeit_Sekunde_Zähler_Relativ_X_NWR_LIN) ungültig oder nicht empfangen |
802E64 | Adjustment path of motor M8 not plausible | Verstellweg des Motors M8 nicht plausibel |
802E65 | Adjustment path of motor M9 not plausible | Verstellweg des Motors M9 nicht plausibel |
802E66 | Adjustment path of motor M10 not plausible | Verstellweg des Motors M10 nicht plausibel |
802E67 | Adjustment path of motor M11 not plausible | Verstellweg des Motors M11 nicht plausibel |
802E68 | Shutdown of CAN communication due to overtemperature on the CAN transceiver | Abschaltung CAN Kommunikation wegen Übertemperatur am CAN-Transceiver |
802E69 | Shutdown of LIN communication due to overtemperature on the LIN transceiver | Abschaltung LIN Kommunikation wegen Übertemperatur am LIN-Transceiver |
802E6A | Monitor inclination adjustment button (RSE) in the RR: short circuit to plus or interruption | Taste Monitorneigungsverstellung (RSE) im RR: Kurzschluss nach Plus oder Unterbrechung |
802E6B | Monitor inclination adjustment button (RSE) in the RR: Short circuit to ground | Taste Monitorneigungsverstellung (RSE) im RR: Kurzschluss nach Masse |
802E6C | Picnic table adjustment button (PTV) in the RR: short circuit to plus or interruption | Taste Picknicktischverstellung (PTV) im RR: Kurzschluss nach Plus oder Unterbrechung |
802E6D | Picnic table adjustment button (PTV) in the RR: Short circuit to ground | Taste Picknicktischverstellung (PTV) im RR: Kurzschluss nach Masse |
802E6E | FoldBench in the RR, backrest folding button in the luggage compartment: short circuit to ground | FoldBench im RR, Taster Lehnenklappung im Gepäckraum: Kurzschluss nach Masse |
802E6F | FoldBench in the RR, backrest folding button next to the seat: short circuit to ground | FoldBench im RR, Taster Lehnenklappung Nachbarsitz: Kurzschluss nach Masse |
802E70 | Neck warmer control switch: Error in EEPROM | Bedienschalter Nackenwärmer: Fehler im EEPROM |
802E71 | FoldBench in the RR: no status change detected in the backrest locking contact after the backrest was folded | FoldBench im RR: kein Statuswechsel beim Lehnenverriegelungskontakt nach der Lehnenklappung erkannt |
802E72 | Adjustment path of the LNV (FBK2: SLV_SR2) not plausible | Verstellweg der LNV (FBK2:SLV_SR2) nicht plausibel |
802E73 | FoldBench in the RR: restricted adjustment due to missing calibration with LNV | FoldBench im RR: eingeschränkte Verstellung wegen fehlender Kalibrierung bei LNV |
802E74 | FoldBench in RR, backrest folding button, local seat: button hangs | FoldBench im RR, Taster Lehnenklappung lokaler Sitz: Taster hängt |
802E75 | FoldBench in the RR, backrest folding button in the luggage compartment: button hangs | FoldBench im RR, Taster Lehnenklappung im Gepäckraum: Taster hängt |
802E76 | FoldBench in the RR, backrest folding button next to the seat: button hangs | FoldBench im RR, Taster Lehnenklappung Nachbarsitz: Taster hängt |
802E77 | FoldBench in RR, backrest folding button local seat: short circuit to positive or interruption | FoldBench im RR, Taster Lehnenklappung lokaler Sitz: Kurzschluss nach Plus oder Unterbrechung |
802E78 | FoldBench in the RR, backrest folding button in the luggage compartment: short circuit to positive or interruption | FoldBench im RR, Taster Lehnenklappung im Gepäckraum: Kurzschluss nach Plus oder Unterbrechung |
802E79 | FoldBench in RR, backrest folding button next to the seat: short circuit to plus or interruption | FoldBench im RR, Taster Lehnenklappung Nachbarsitz: Kurzschluss nach Plus oder Unterbrechung |
802E7A | Map of the sun visor: limited adjustment due to missing calibration (SLV rear, LNV front, SHV below) | Kennfeld Sonnenblende: eingeschränkte Verstellung wegen fehlender Kalibrierung (SLV hinten, LNV vorne, SHV unten) |
802E7B | FoldBench in RR, backrest folding button local seat: short circuit to ground | FoldBench im RR, Taster Lehnenklappung lokaler Sitz: Kurzschluss nach Masse |
802E7C | Installation location implausible | Verbauort unplausibel |
802E7D | FuSi: Safety Observer not active | FuSi: Safety-Observer nicht aktiv |
802E7E | FuSi: Switching off the seat adjustment due to a SW error (for details see STATUS_FUSI_EVENTLOG_SITZ) | FuSi: Abschaltung der Sitzverstellung aufgrund eines SW-Fehlers (Details siehe STATUS_FUSI_EVENTLOG_SITZ) |
802E7F | FuSi: Degradation of the seat adjustment due to a SW error (for details see STATUS_FUSI_EVENTLOG_SITZ) | FuSi: Degradation der Sitzverstellung aufgrund eines SW-Fehlers (Details siehe STATUS_FUSI_EVENTLOG_SITZ) |
802F80 | Hall sensor SLV: short circuit to minus | Hallgeber SLV: Kurzschluss nach Minus |
802F81 | Hall sensor SLV: short circuit to positive or interruption | Hallgeber SLV: Kurzschluss nach Plus oder Unterbrechung |
802F82 | Hall sender SHV: short circuit to minus | Hallgeber SHV: Kurzschluss nach Minus |
802F83 | Hall sender SHV: short circuit to positive or interruption | Hallgeber SHV: Kurzschluss nach Plus oder Unterbrechung |
802F84 | Hall sender LNV: short circuit to minus | Hallgeber LNV: Kurzschluss nach Minus |
802F85 | Hall sender LNV: short circuit to positive or interruption | Hallgeber LNV: Kurzschluss nach Plus oder Unterbrechung |
802F86 | Hall sender SNV: short circuit to minus | Hallgeber SNV: Kurzschluss nach Minus |
802F87 | Hall sender SNV: short circuit to positive or interruption | Hallgeber SNV: Kurzschluss nach Plus oder Unterbrechung |
802F88 | Hall sender KHV: Short circuit to minus | Hallgeber KHV: Kurzschluss nach Minus |
802F89 | Hall sender KHV: short circuit to positive or interruption | Hallgeber KHV: Kurzschluss nach Plus oder Unterbrechung |
802F8A | Hall sender in the M11: Open circuit or short circuit | Hallgeber im M11: Leitungsunterbrechung oder Kurzschluss |
802F8C | Hall sender STV: Short circuit to minus | Hallgeber STV: Kurzschluss nach Minus |
802F8D | Hall sender STV: short circuit to positive or interruption | Hallgeber STV: Kurzschluss nach Plus oder Unterbrechung |
802F8E | Hall sender LBV: Short circuit to minus | Hallgeber LBV: Kurzschluss nach Minus |
802F8F | Hall sender LBV: Short circuit to positive or interruption | Hallgeber LBV: Kurzschluss nach Plus oder Unterbrechung |
802F90 | Hall sensor LKV: short circuit to minus | Hallgeber LKV: Kurzschluss nach Minus |
802F91 | Hall sensor LKV: short circuit to positive or interruption | Hallgeber LKV: Kurzschluss nach Plus oder Unterbrechung |
802F92 | Motor SLV: Motor overload or short circuit, short circuit low-side to plus or short circuit high-side to minus | Motor SLV: Überlast oder Kurzschluss Motor, Kurzschluss Low-Side nach Plus oder Kurzschluss High-Side nach Minus |
802F93 | Motor SLV: short circuit low-side to minus or interruption | Motor SLV: Kurzschluss Low-Side nach Minus oder Unterbrechung |
802F94 | Motor SHV: Motor overload or short circuit, short circuit low-side to plus or short circuit high-side to minus | Motor SHV: Überlast oder Kurzschluss Motor, Kurzschluss Low-Side nach Plus oder Kurzschluss High-Side nach Minus |
802F95 | Motor SHV: Short-circuit low-side to minus or interruption | Motor SHV: Kurzschluss Low-Side nach Minus oder Unterbrechung |
802F96 | Motor LNV: Motor overload or short circuit, short circuit low-side to plus or short circuit high-side to minus | Motor LNV: Überlast oder Kurzschluss Motor, Kurzschluss Low-Side nach Plus oder Kurzschluss High-Side nach Minus |
802F97 | Motor LNV: Short circuit low-side to minus or interruption | Motor LNV: Kurzschluss Low-Side nach Minus oder Unterbrechung |
802F98 | Motor SNV: Motor overload or short circuit, short circuit low-side to plus or short circuit high-side to minus | Motor SNV: Überlast oder Kurzschluss Motor, Kurzschluss Low-Side nach Plus oder Kurzschluss High-Side nach Minus |
802F99 | Motor SNV: Short circuit low-side to minus or interruption | Motor SNV: Kurzschluss Low-Side nach Minus oder Unterbrechung |
802F9A | Motor KHV: Motor overload or short circuit, short circuit low-side to plus or short circuit high-side to minus | Motor KHV: Überlast oder Kurzschluss Motor, Kurzschluss Low-Side nach Plus oder Kurzschluss High-Side nach Minus |
802F9B | Motor KHV: short circuit low-side to minus or interruption | Motor KHV: Kurzschluss Low-Side nach Minus oder Unterbrechung |
802F9C | Motor FEH: Overload or short circuit motor or short circuit low-side to plus or short circuit high-side to minus | Motor FEH: Überlast oder Kurzschluss Motor oder Kurzschluss Low-Side nach Plus oder Kurzschluss High-Side nach Minus |
802F9D | Motor FEH: short circuit low-side to minus or interruption | Motor FEH: Kurzschluss Low-Side nach Minus oder Unterbrechung |
802F9E | Motor STV: Motor overload or short circuit, short circuit low-side to plus or short circuit high-side to minus | Motor STV: Überlast oder Kurzschluss Motor, Kurzschluss Low-Side nach Plus oder Kurzschluss High-Side nach Minus |
802F9F | Motor STV: Short-circuit low-side to minus or interruption | Motor STV: Kurzschluss Low-Side nach Minus oder Unterbrechung |
802FA0 | Motor LBV: Motor overload or short circuit, short circuit low-side to plus or short circuit high-side to minus | Motor LBV: Überlast oder Kurzschluss Motor, Kurzschluss Low-Side nach Plus oder Kurzschluss High-Side nach Minus |
802FA1 | Motor LBV: Short circuit low-side to minus or interruption | Motor LBV: Kurzschluss Low-Side nach Minus oder Unterbrechung |
802FA2 | Motor LKV: Motor overload or short circuit, short circuit low-side to plus or short circuit high-side to minus | Motor LKV: Überlast oder Kurzschluss Motor, Kurzschluss Low-Side nach Plus oder Kurzschluss High-Side nach Minus |
802FA3 | Motor LKV: short circuit low-side to minus or interruption | Motor LKV: Kurzschluss Low-Side nach Minus oder Unterbrechung |
802FA4 | Temperature sensor heating field pillow: Short circuit to positive | Temperaturfühler Heizfeld Kissen: Kurzschluss nach Plus |
802FA5 | Temperature sensor heating field cushion: interruption or short circuit to minus | Temperaturfühler Heizfeld Kissen: Unterbrechung oder Kurzschluss nach Minus |
802FA6 | Temperature sensor heating field cushion: sensor defective | Temperaturfühler Heizfeld Kissen: Fühler defekt |
802FA7 | Backrest heating field temperature sensor: Short circuit to positive | Temperaturfühler Heizfeld Lehne: Kurzschluss nach Plus |
802FA8 | Backrest heating field temperature sensor: interruption or short circuit to minus | Temperaturfühler Heizfeld Lehne: Unterbrechung oder Kurzschluss nach Minus |
802FA9 | Backrest heating field temperature sensor: Defective sensor | Temperaturfühler Heizfeld Lehne: Fühler defekt |
802FAA | Heating field cushion: short circuit to plus or overload | Heizfeld Kissen: Kurzschluss nach Plus oder Überlast |
802FAB | Heating field cushion: short circuit to minus or interruption | Heizfeld Kissen: Kurzschluss nach Minus oder Unterbrechung |
802FAC | Backrest heating field: short circuit to plus or overload | Heizfeld Lehne: Kurzschluss nach Plus oder Überlast |
802FAD | Backrest heating field: short circuit to minus or interruption | Heizfeld Lehne: Kurzschluss nach Minus oder Unterbrechung |
802FAF | Seat climate supply: short circuit to minus or overload | Versorgung Sitzklima: Kurzschluss nach Minus oder Überlast |
802FB0 | Seat climate supply: short circuit to plus or interruption | Versorgung Sitzklima: Kurzschluss nach Plus oder Unterbrechung |
802FB1 | Control seat climate cushion: short circuit to minus or interruption | Steuerung Sitzklima Kissen: Kurzschluss nach Minus oder Unterbrechung |
802FB2 | Control seat climate cushion: short circuit to plus | Steuerung Sitzklima Kissen: Kurzschluss nach Plus |
802FB3 | Control seat climate cushion: At least one fan in alarm state | Steuerung Sitzklima Kissen: Mindestens ein Lüfter in Alarmzustand |
802FB4 | Backrest seat climate control: Short circuit to minus or interruption | Steuerung Sitzklima Lehne: Kurzschluss nach Minus oder Unterbrechung |
802FB5 | Backrest seat climate control: short circuit to positive | Steuerung Sitzklima Lehne: Kurzschluss nach Plus |
802FB6 | Backrest seat climate control: At least one fan in alarm state | Steuerung Sitzklima Lehne: Mindestens ein Lüfter in Alarmzustand |
802FB7 | Active seat motor: cam motor short circuit or interruption, cam switch short circuit or interruption | Motor Aktivsitz: Nockenmotor Kurzschluss oder Unterbrechung, Nockenschalter Kurzschluss oder Unterbrechung |
802FB8 | Active seat magnet: Short circuit to minus or overload | Magnet Aktivsitz: Kurzschluss nach Minus oder Überlast |
802FB9 | Active seat magnet: short circuit to positive or interruption | Magnet Aktivsitz: Kurzschluss nach Plus oder Unterbrechung |
802FBA | Lumbar support valve block: Short circuit to minus or overload | Ventilblock Lordosenstütze: Kurzschluss nach Minus oder Überlast |
802FBB | Lumbar support valve block: Short circuit to positive or valve not inserted | Ventilblock Lordosenstütze: Kurzschluss nach Plus oder Ventil nicht gesteckt |
802FBC | Lumbar support pump: Short circuit to minus or overload | Pumpe Lordosenstütze: Kurzschluss nach Minus oder Überlast |
802FBD | Lumbar support pump: short circuit to positive or interruption | Pumpe Lordosenstütze: Kurzschluss nach Plus oder Unterbrechung |
802FBE | SVS switch: short circuit to minus | Schalter SVS: Kurzschluss nach Minus |
802FBF | SVS switch: short circuit to positive or interruption | Schalter SVS: Kurzschluss nach Plus oder Unterbrechung |
802FC0 | SVS switch: switch is hanging | Schalter SVS: Schalter hängt |
802FC1 | Easy Entry switch: switch defective | Schalter Easy Entry: Schalter defekt |
802FC2 | Easy Entry switch: switch is hanging | Schalter Easy Entry: Schalter hängt |
802FC3 | Switch LVK: short circuit to minus | Schalter LVK: Kurzschluss nach Minus |
802FC4 | Switch LVK: short circuit to positive or interruption | Schalter LVK: Kurzschluss nach Plus oder Unterbrechung |
802FC5 | LVK switch: switch defective | Schalter LVK: Schalter defekt |
802FC6 | Switch LIN: switch is hanging | Schalter LIN: Schalter hängt |
802FC7 | ÜKB: Adaptation range exceeded when adjusting | ÜKB: Adaptionsbereichsueberschreitung bei Verstellung vor |
802FC8 | ÜKB: Adaptation range exceeded when adjusting back | ÜKB: Adaptionsbereichsueberschreitung bei Verstellung zurück |
802FC9 | Map 2./3. Seat row FBKII: restricted adjustment of second / third row of seats due to missing calibration | Kennfeld 2./3. Sitzreihe FBKII: eingeschränkte Verstellung zweite/dritte Sitzreihe wegen fehlender Kalibrierung |
802FCA | Seat position transfer woman-man: No sending of the seat position due to missing or invalid calibration (SLV front) | Sitzpositionsübergabe Frau-Mann: Kein Versenden der Sitzposition wegen fehlender oder ungültiger Kalibrierung (SLV vorne) |
802FCB | ÜKB: Adaptation range exceeded when adjusting the Easy Entry function, 2nd row of seats | ÜKB: Adaptionsbereichsueberschreitung bei Verstellung der Funktion Easy Entry 2. Sitzreihe |
802FCC | ÜKB: Adaptation range exceeded when adjusting the LNV function | ÜKB: Adaptionsbereichsueberschreitung bei Verstellung der Funktion LNV |
802FCD | ÜKB: Adaptation range exceeded when adjusting the LNV function, 3rd row of seats | ÜKB: Adaptionsbereichsueberschreitung bei Verstellung der Funktion LNV 3. Sitzreihe |
802FCE | Supply voltage relay (30s): Short circuit to minus or driver defective | Versorgungsspannung Relais (30s): Kurzschluss nach Minus oder Treiber defekt |
802FCF | Supply voltage relay (30s): Short circuit to positive | Versorgungsspannung Relais (30s): Kurzschluss nach Plus |
802FD0 | Coding value for target temperature of seat heating incorrectly entered (target value exceeds maximum value) | Codierwert für Zieltemperatur der Sitzheizung falsch bedatet (Zielwert übersteigt Maximalwert) |
802FD1 | Monitoring of circuit board temperature: switch off seat adjustment / seat heating / seat climate due to excess temperature | Überwachung Leiterplattentemperatur: Abschaltung Sitzverstellung/Sitzheizung/Sitzklima wegen Übertemperatur |
802FD2 | No resumption of seat adjustment due to the engine start condition timer expiry | Keine Wiederaufnahme der Sitzverstellung wegen Timerablauf Motorstartbedingung |
802FD3 | Overvoltage detected | Überspannung erkannt |
802FD4 | Undervoltage detected | Unterspannung erkannt |
802FD5 | Switch LIN: Error overload PWM | Schalter LIN: Fehler Überlastung PWM |
802FD6 | LIN switch: Error in EEPROM | Schalter LIN: Fehler im EEPROM |
802FD7 | Map 1./2. Seat row FBKII: limited adjustment of the second row of seats due to missing calibration in the first row of seats | Kennfeld 1./2. Sitzreihe FBKII: eingeschränkte Verstellung zweite Sitzreihe wegen fehlender Kalibrierung in der ersten Sitzreihe |
802FD8 | Timeout when receiving the message 0x2C8 - Status_Sitzreihe_Fond | Timeout beim Empfang der Botschaft 0x2C8 - Status_Sitzreihe_Fond |
802FD9 | Switch LVK II: short circuit to minus | Schalter LVK II: Kurzschluss nach Minus |
802FDA | Switch LVK II: short circuit to positive or interruption | Schalter LVK II: Kurzschluss nach Plus oder Unterbrechung |
802FDB | Switch LVK II: switch defective | Schalter LVK II: Schalter defekt |
802FDC | Charging contact 2nd row of seats: Contact defective | Durchladekontakt 2. Sitzreihe: Kontakt defekt |
802FDD | Adjustment path of the LBV (RR: CRW) not plausible | Verstellweg der LBV (RR:CRW) nicht plausibel |
802FDE | SVS switch: switch defective | Schalter SVS: Schalter defekt |
802FDF | Backrest folding switch, 2nd row of seats: Short circuit to minus | Schalter Lehnenklappung 2. Sitzreihe: Kurzschluss nach Minus |
802FE0 | Backrest folding switch, 2nd row of seats: Short circuit to positive or interruption | Schalter Lehnenklappung 2. Sitzreihe: Kurzschluss nach Plus oder Unterbrechung |
802FE1 | Backrest folding switch, 2nd row of seats: switch defective | Schalter Lehnenklappung 2. Sitzreihe: Schalter defekt |
802FE2 | Backrest folding switch 2nd row of seats: switch hangs | Schalter Lehnenklappung 2. Sitzreihe: Schalter hängt |
802FE3 | Tilting Boot switch in the RR: Short circuit to minus | Schalter Tilting Boot im RR: Kurzschluss nach Minus |
802FE4 | Tilting Boot switch in the RR: short circuit to positive or interruption | Schalter Tilting Boot im RR: Kurzschluss nach Plus oder Unterbrechung |
802FE5 | Tilting Boot switch in the RR: switch defective | Schalter Tilting Boot im RR: Schalter defekt |
802FE6 | Tilting Boot switch in the RR: switch hangs | Schalter Tilting Boot im RR: Schalter hängt |
802FE7 | Easy Entry switch: Short circuit to minus | Schalter Easy Entry: Kurzschluss nach Minus |
802FE8 | FoldBench in the RR, switch combination LVK / backrest folded: switch status implausible | FoldBench im RR, Schalterkombination LVK / Lehne geklappt: Schalterzustand unplausibel |
802FE9 | Adjustment path of the SLV (FodBench RR: LFE) (FBK2: LNV_SR2) not plausible | Verstellweg der SLV (FodBench RR:LFE) (FBK2:LNV_SR2) nicht plausibel |
802FEA | Actuator motor has not reached target speed | Verstellmotor hat die Sollgeschwindigkeit nicht erreicht |
802FEB | Actuator switched off due to overtemperature | Verstellmotor abgeschaltet wegen Übertemperatur |
802FEC | Checksum error for the coding data | Prüfsummenfehler für die Codierdaten |
802FED | Checksum calculation for parameter values disabled | Prüfsummenberechnung für Parameter-Werte deaktiviert |
802FEE | FuSi: Switching off the seat heating due to a SW error (for details see STATUS_FUSI_EVENTLOG_SITZ) | FuSi: Abschaltung der Sitzheizung aufgrund eines SW-Fehlers (Details siehe STATUS_FUSI_EVENTLOG_SITZ) |
802FEF | FuSi: Degradation of the seat heating due to a SW error (for details see STATUS_FUSI_EVENTLOG_SITZ) | FuSi: Degradation der Sitzheizung aufgrund eines SW-Fehlers (Details siehe STATUS_FUSI_EVENTLOG_SITZ) |
802FF0 | Adjustment path of the SHV (RR: FSV) (FBK2: LNV_SR3) not plausible | Verstellweg der SHV (RR:FSV) (FBK2:LNV_SR3) nicht plausibel |
802FF1 | Adjustment path of the SNV (FBK2: EE_SR2) not plausible | Verstellweg der SNV (FBK2:EE_SR2) nicht plausibel |
802FF2 | Adjustment path of the KHV (FBK2: LFE_SR3) not plausible | Verstellweg der KHV (FBK2:LFE_SR3) nicht plausibel |
802FF3 | Adjustment path of the STV (RR: CRFE) not plausible | Verstellweg der STV (RR:CRFE) nicht plausibel |
802FF4 | Adjustment path of the LKV not plausible | Verstellweg der LKV nicht plausibel |
802FF5 | Parking position KHV / LKV: restricted adjustment due to missing calibration | Parkposition KHV/LKV: eingeschränkte Verstellung wegen fehlender Kalibrierung |
802FFF | SMBFH: Stand-alone mode active | SMBFH: Stand-Alone Mode aktiv |
Other blocks
Makes that use these codes
Code descriptions are shown in their source language; records without a translation stay raw. Source: CarCoding fault code database.
Get CarCoding
Connect your ELM327 adapter, read fault codes, and browse module settings on supported vehicles.
The app is free to download.